Steel Detailing Services Florida
Drafting Buddies has been producing fabrication-ready structural steel drawings for U.S. fabricators, erectors, and general contractors since 2014. Our steel detailing services Florida team detail every structural steel shop drawings Florida package to FBC Chapter 22, AISC 360, the AISC Steel Construction Manual, and AWS D1.1 structural welding requirements — with connection, anchor bolt, and base plate detailing rated for the 130-180 mph wind speeds found across Florida's coastal and High-Velocity Hurricane Zone (HVHZ) counties. From Tekla steel detailing services Florida to miscellaneous steel detailing Florida, our BBB A+ rated team delivers steel shop drawings, erection drawings, and steel BIM modeling that fabricators can cut and erect from with confidence.
What We Detail
Our structural steel detailing Florida team covers everything from primary steel frames to miscellaneous steel and rebar coordination, backed by structural drafting services Florida engineers and detailers rely on.
Full structural steel detailing services covering beams, columns, braces, and moment frames, developed into fabrication-ready structural steel shop drawings Florida fabricators can release straight to the shop floor.
Piece-by-piece steel fabrication drawings with cut lists, bolt patterns, and weld symbols, produced as steel shop drawing services Florida contractors use for fabrication approval and shop scheduling.
Erection sequence plans, bolted and welded connection callouts, and field-erection drawings that keep steel erectors coordinated on-site and on schedule.
Stairs, handrails, guardrails, ladders, catwalks, and embed plate detailing — the miscellaneous steel detailing Florida scope that ties structural steel into architectural and life-safety requirements.
Tekla Structures detailing and Tekla steel modeling for fabricators who need a coordinated 3D steel model, NC/DSTV files for CNC fabrication equipment, and clash-checked Tekla steel shop drawings.
Connection design drawings covering shear tabs, moment connections, base plates, and anchor bolt drawings, engineered to resist Florida's wind-uplift and lateral load requirements.
Rebar detailing Florida services for foundations, embed plates, and composite steel-concrete connections, coordinated directly with the structural steel model to eliminate field conflicts.
Structural BIM services and BIM coordination Florida that run clash detection against architectural, MEP, and concrete models before steel ever reaches the shop.
Steel takeoff, material lists, and bill of materials support for accurate steel fabrication bidding and procurement planning on Florida projects.
Detail Level
Our steel BIM modeling Florida deliverables scale from coordination-level models to full fabrication and as-built detail.
| LOD | Detail Delivered |
|---|---|
| LOD 300 | Structural steel modeled to size, shape, location, and orientation for design coordination and clash detection. |
| LOD 350 | Connection interfaces and bracing added, supporting cross-discipline BIM coordination Florida and clash detection services Florida. |
| LOD 400 | Fabrication-level detail including bolts, welds, and connection hardware for steel shop drawings and CNC data output. |
| LOD 500 | As-built steel model verified to field conditions, used for facility management and future renovation planning. |
Software We Use
Built To Code
Every steel detailing services Florida deliverable is checked against the codes and standards below before it leaves our team — including shop drawing coordination for multi-trade Florida projects.
The Florida Building Code's steel chapter governs the design, fabrication, and erection of iron and steel, with additional Sections 2215-2223 applying specifically to structural and cold-formed steel in the High-Velocity Hurricane Zone.
Member design, connection design drawings, and deflection limits follow AISC 360 and the AISC Steel Construction Manual, referenced directly by FBC Chapter 22 for every structural steel drafting company deliverable we produce.
Weld detailing, procedure qualification, and welder certification requirements follow AWS D1.1, with AWS D1.3 and D1.4 applied where sheet steel or reinforcing steel welding is involved.
Basic wind speeds run roughly 130-150 mph across Central Florida and the Panhandle and up to 170-180 mph inside the Miami-Dade and Broward HVHZ, driving anchor bolt, base plate, and moment-connection design on every project.
Manufactured steel components and connectors used statewide require Florida Product Approval (FL #), while HVHZ counties require Miami-Dade Notice of Acceptance (NOA) or Broward County Product Control approval.
Florida's humidity and salt-air exposure push our detailing toward hot-dip galvanizing, appropriate coating systems, and corrosion allowances on exposed structural and miscellaneous steel near the coastline.
How We Work
Structural drawings and steel takeoff establish scope and material lists.
Tekla or SDS/2 modeling at LOD 300-350 for coordination and clash detection.
Bolt, weld, and base plate detailing engineered to AISC 360 and Florida wind loads.
Fabrication-ready steel shop drawings and erection drawings released to the shop floor.
RFI response and revision support through fabrication and field erection.
Why Drafting Buddies
BBB-rated steel detailing company Florida
Structural steel & BIM detailing experience
Turnaround on steel shop drawings and quotes
Every set verified against FBC, AISC, and AWS standards
Where We Work
Steel detailing near me searches across Florida lead back to one detailing team, serving fabricators statewide with structural steel shop drawings built for local wind and code requirements.
HVHZ steel detailing for high-rises, hotels, and coastal frames under Miami-Dade NOA and FBC Sections 2215–2223.
Theme-park, hospitality, and mixed-use steel shop drawings for Central Florida fabricators and GCs.
Bay-area commercial and industrial steel detailing with ASCE 7 wind loads for Hillsborough County projects.
Port, warehouse, and institutional steel packages for Northeast Florida fabricators and erectors.
Broward HVHZ connection and anchor-bolt detailing for coastal towers and waterfront structures.
Coastal condo and commercial framing with corrosion-aware detailing for Gulf Coast salt-air exposure.
Luxury residential and resort steel detailing for Collier County wind and coastal design pressures.
Southwest Florida growth projects — retail, medical, and multi-family steel shop and erection drawings.
Office, education, and mid-rise steel detailing coordinated for Palm Beach County submittals.
Government, campus, and institutional structural steel drawings for Florida’s capital region.
Pinellas waterfront and urban infill steel packages with Gulf-side wind and corrosion detailing.
University and healthcare steel detailing for Alachua County research and campus facilities.
Downtown high-rise and civic steel shop drawings for Palm Beach County fabricators and contractors.
Central Florida warehouse, logistics, and light-industrial steel framing and miscellaneous steel.
Panhandle coastal and military-adjacent steel detailing rated for Northwest Florida wind speeds.
Related Searches
Steel Detailing Services Florida