LOD 400 BIM Modeling Services

Fabrication-ready BIM models for structural, MEP and architectural trades. Drafting Buddies builds LOD 400 models with exact geometry, connections, spool breaks, hangers and assembly data, so your trade partners can fabricate and install straight from the model. Serving contractors, fabricators and engineers across all 50 US states.

LOD scale · Fabrication level

LOD 100LOD 200LOD 300LOD 350LOD 400LOD 500

What Is LOD 400?

Level of Development

Level of Development (LOD) describes how much geometric detail and reliable information a model element carries at each project stage. LOD 400 is the fabrication level: exact geometry, connections, spool breaks, hangers and assembly data so trade partners can fabricate and install straight from the model.

  • Exact geometry with connection and assembly detail
  • Fabrication-level data: part marks, weights, materials, finishes
  • Coordinated with every trade, with clashes resolved
  • Output ready for shop drawings, CNC and prefab shops

2014

Founded in Austin, Texas

CAD drafting, BIM and AEC services

A+

BBB rating

Clear communication and dependable delivery

50

US states served

Contractors, fabricators and engineers

100–500

Full LOD range delivered

Concept through as-built

Level of Development

Understanding BIM LOD Levels 100 to 500

Level of Development describes how much geometric detail and reliable information a model element carries at each project stage. Here is how the full scale works, and where LOD 400 sits.

LOD 100

Concept

Massing, area and height shown as symbols or simple volumes. Used for feasibility studies and early cost and site planning.

LOD 200

Schematic design

Generic elements with approximate size, shape, location and quantity. Suited to design development and early coordination.

LOD 300

Design-intent model

Accurate size, shape, location and orientation. Used for construction documents, permit drawings and general clash detection.

LOD 350

Coordination model

Adds interfaces with other trades, supports and connections so systems can be coordinated before fabrication begins.

LOD 400

Fabrication and assembly

Elements are modeled with the precise detail needed to fabricate, assemble and install. This is the fabrication level.

LOD 500

As-built

Field-verified model that reflects what was actually installed. Handed over for facility management, operations and maintenance.

What Is LOD 400 BIM Modeling?

Definition

Detailed Enough to Fabricate and Install

LOD 400 BIM modeling is the level of development where a model element is detailed enough for fabrication, assembly and installation. Each element is shown with its exact size, shape, location, quantity and orientation, plus the connections, fasteners, supports and manufacturer-specific information a shop or field crew needs.

Beyond design intent

How the Element Is Actually Built

Where LOD 300 describes design intent, LOD 400 describes how the element is actually built. That is why it is the standard for steel detailing, MEP prefabrication, precast, curtain wall and other trade-contractor models.

Built from your inputs

Models, Drawings or Point Clouds

Complete LOD 400 modeling for the trades that fabricate and install, built from your design models, drawings or point-cloud data. The result is a coordinated model your fabricators and installers can work from directly.

Comparison

LOD 400 BIM Modeling vs Other LOD Levels

The jump from LOD 300 to LOD 400 is where a model stops describing a design and starts describing a product.

AspectLOD 300LOD 350LOD 400LOD 500
PurposeDesign intentTrade coordinationFabrication and installationAs-built record
GeometryAccurate, genericAccurate with interfacesExact, with assembly detailField-verified
ConnectionsNot detailedShown as supportsFully modeledAs installed
Typical usePermits, CDsClash detectionShop drawings, prefab, CNCFacility management
Main userArchitect / engineerGeneral contractorFabricator / sub-contractorOwner / operator

Services

Our LOD 400 BIM Modeling Services

Complete LOD 400 modeling for the trades that fabricate and install, built from your design models, drawings or point-cloud data.

L4-01

Structural LOD 400 BIM Modeling

Structural LOD 400 models give steel fabricators and erectors a complete, buildable digital assembly. We model every member and connection, so piece marks, bolt counts and weld symbols come straight from the model.

Beams, columns, braces, plates, bolts and welds are modeled to fabrication detail, along with miscellaneous steel and the erection information the shop and field crews need.

  • Steel members, base plates, gussets and moment connections
  • Bolts, welds, cope and notch details
  • Rebar, embeds, anchor bolts and cast-in items
  • Miscellaneous steel: stairs, ladders, handrails, platforms
  • Erection sequencing and assembly marks

Fabrication

LOD 400 Fabrication and Shop Drawing Services

Because LOD 400 carries fabrication detail, shop drawings can be generated directly from the model, which reduces transcription errors and shortens the approval loop.

Steel

Fabrication and Erection Drawings

Fabrication and erection drawings for structural steel and miscellaneous metals, generated from the LOD 400 model.

MEP

Spool Drawings and Prefabrication Sheets

Spool drawings and MEP prefabrication sheets, with the routing, hangers and spool breaks the shop needs.

Assembly

Assembly Drawings, Part Lists and Cut Lists

Assembly drawings, part lists and cut lists produced from the same model, so quantities and marks stay consistent.

CNC

Machine-Ready Data Exports

CNC and fabrication-machine data exports, including DSTV and DXF, where the shop requires them.

Review

Submittal-Ready Sheets

Submittal-ready sheets for architect and engineer review, issued from the model so the approval set matches the fabrication data.

Process

LOD 400 BIM Modeling Workflow

From the first scope review through coordinated modeling, shop sheets and delivery of the agreed files.

Scope Review

We review drawings, models, specs and the LOD requirement, then confirm scope before work begins.

Modeling

Elements are built with connections, supports and assembly detail at fabrication level.

Coordination

Multi-trade clash checks are run, and RFIs are raised and resolved before release.

Drawings

Shop, spool and assembly sheets are generated from the model.

QA and Delivery

An internal quality check, then delivery of the agreed files.

LOD 400 BIM Deliverables

Native models, open formats, shop drawings, schedules, clash reports and CNC data, delivered in the formats agreed for the project.

  • Native models: Revit (.rvt), Tekla and Navisworks coordination files as agreed
  • Open formats: IFC exports for cross-platform exchange and archiving
  • Shop and fabrication drawings: PDF and DWG sheets with part marks, dimensions and notes
  • Schedules and BOMs: material take-offs, part lists and quantity schedules in Excel or PDF
  • Clash reports: documented clash detection results with resolution status
  • CNC data: machine-ready exports for fabrication shops where required
Tools

Software Used for
LOD 400 BIM
Modeling

We work in the platforms your fabricators and project teams already use. The tool set depends on the discipline and your project requirements.

Typical deliverables include native Revit and Tekla models, Navisworks coordination files, IFC, PDF and DWG sheets, Excel or PDF schedules, and CNC exports such as DSTV and DXF where required.

Autodesk RevitTekla StructuresNavisworksAutoCADAutodesk Fabrication CADmepSolidWorksBluebeam

Autodesk Revit

Native models for architectural, structural and MEP scopes, delivered as agreed for the project.

Tekla Structures

Fabrication-level structural steel models, with connections, assembly marks and shop output.

Navisworks

Coordination files for multi-trade clash detection and documented resolution before release.

AutoCAD

DWG sheets for shop, spool and assembly drawings, with part marks, dimensions and notes.

Use Cases

LOD 400 BIM Modeling Applications

Fabrication-level models for the building types where shop drawings, prefabrication and trade coordination drive the schedule.

Commercial Buildings

Offices, retail and mixed-use projects with heavy MEP coordination.

Industrial and Warehouses

Steel frames, process piping and equipment rooms.

Healthcare and Labs

Dense systems where clearances and prefab matter most.

Data Centers

Repeatable, prefab-friendly MEP and structural packages.

Infrastructure

Bridges, plants and utility facilities with complex steel and concrete.

Multifamily and Hospitality

Repetitive layouts suited to prefabricated components.

Benefits

Benefits of LOD 400 BIM Modeling

A fabrication-level model gives every trade the same geometry, connections and quantities to build from.

01

Fewer Field Clashes

Conflicts are solved digitally, before materials are cut.

02

Faster Shop Drawings

Sheets come from the model, not from redrawing.

03

Less Rework and Waste

Accurate part data cuts ordering and fabrication errors.

04

Prefab-Ready

Spools and assemblies can be built off-site with confidence.

05

Better Cost and Schedule Control

Reliable quantities and sequencing.

06

Single Source of Truth

One coordinated model for every trade.

Why Us

Why Choose Drafting Buddies?

Fabrication-ready LOD 400 models for structural, MEP and architectural trades, delivered to contractors, fabricators and engineers across the United States.

Founded in 2014

Over a decade of CAD drafting, BIM and AEC services, headquartered in Austin, Texas.

A+ BBB Rating

A track record built on clear communication and dependable delivery.

All 50 States

Remote delivery to US contractors, fabricators and design firms nationwide.

One Team, Every Discipline

Structural, MEP, architectural and shop drawings under one roof.

Standards-Aware

Models follow your BIM execution plan, naming and LOD specification.

Clear Quotes

Scope-based pricing with no hidden surprises.

2014

Founded in Austin, Texas

A+

BBB Rating

50

US States Served

100–500

Full LOD Range Delivered

LOD 400 BIM Modeling:

Frequently Asked Questions

Clear answers on fabrication-level BIM, shop drawings and how an existing model can be upgraded.

LOD 400 is the level of development where model elements carry the exact geometry, connections and data needed for fabrication, assembly and installation. It goes beyond design intent and describes how each element is actually built.

Ready to Start Your LOD 400 BIM Project?

Send your drawings or model and tell us the LOD requirement. We will review the scope and come back with a clear quote.