BIM sub-services for Louisiana projects
Nine BIM disciplines, each delivered by drafters who work Louisiana projects daily - from parish permit sets to fabrication-ready models.
01 / BIM
Architectural BIM Modeling Louisiana
Revit-based architectural models covering floor plans, elevations, sections and building envelope assemblies, developed to LOD 300-400 and checked against LSUCC and the 2021 IBC/IRC editions Louisiana parishes enforce. We build wall, roof and opening assemblies that already reflect the wind-pressure and water-intrusion detailing coastal and inland reviewers look for, so architectural sets move through permitting with fewer plan-review comments and cleaner coordination against structural and MEP models.
- LSUCC & 2021 IBC/IRC
- Wind-pressure detailing
- LOD 300-400
02 / BIM
Structural BIM Modeling Louisiana
Structural steel, concrete and precast BIM models built for Louisiana's wind-governed design environment, coordinated closely with your engineer of record. We model connections, foundations and lateral systems sized for ASCE 7 wind loads common along the Gulf Coast, and produce models detailed enough for both permit submittal and downstream fabrication, cutting the rework that shows up when structural geometry doesn't match what gets built in the field.
- ASCE 7 wind loads
- Connections & foundations
- Permit & fabrication
03 / BIM
MEP BIM Coordination Louisiana
Mechanical, electrical, plumbing and fire-protection models routed and coordinated in one MEP BIM environment, sized for Louisiana's humid, high-cooling-load climate and hurricane-zone equipment mounting requirements. Ductwork, piping, conduit and sprinkler systems are modeled together so mechanical and electrical routing don't collide with structural framing or architectural ceilings, reducing field conflicts on tight Gulf Coast construction schedules.
- High cooling loads
- Hurricane-zone mounting
- Fire protection
04 / BIM
Revit BIM Modeling Louisiana
Cross-discipline Revit modeling - architectural, structural and MEP - built on shared families and parameters so every team works from one coordinated model instead of disconnected files. We develop models from LOD 100 conceptual massing through LOD 400/500 fabrication and as-built detail, matching whatever stage your Louisiana project is at, and hand off clean, well-organized Revit files your in-house team can keep building on.
- Shared families
- LOD 100-500
- Clean Revit handoff
05 / BIM
BIM Coordination & Clash Detection Louisiana
Navisworks-based clash detection across architectural, structural and MEP models, run before construction starts rather than discovered in the field. We flag hard and soft clashes, route conflicts and clearance issues, and issue coordination reports your team can act on - a step that matters even more on Louisiana projects working around compressed hurricane-season schedules where field rework isn't easily absorbed.
- Navisworks
- Hard & soft clashes
- Coordination reports
06 / BIM
Scan-to-BIM & Point Cloud Modeling Louisiana
Laser scan and point cloud data converted into accurate, discipline-ready Revit models - a service Louisiana owners lean on heavily for renovation, retrofit and storm-damage repair work where existing conditions on paper no longer match the building. We model existing structure, architecture and MEP routing from your scan data so renovation design starts from a verified baseline instead of guesswork.
- Point cloud
- Storm-damage repair
- Verified baseline
07 / BIM
BIM for Construction (4D/5D) Louisiana
Schedule-linked 4D sequencing and 5D quantity takeoff tied directly to the BIM model, giving contractors a model-based view of phasing and cost. For Louisiana general contractors managing weather-sensitive schedules and material lead times, this ties construction sequencing and budget tracking back to the same model your design team is already coordinating in, instead of a separate spreadsheet.
- 4D sequencing
- 5D quantity takeoff
- Weather-sensitive schedules
08 / BIM
BIM Execution Planning & VDC Louisiana
BIM Execution Plans (BEPs), model standards and LOD matrices set up at project kickoff, plus ongoing virtual design and construction (VDC) coordination through the build. We define modeling responsibilities, file-sharing protocols and coordination checkpoints early, so multi-firm Louisiana project teams - architects, engineers, contractors and owners - stay aligned on one model strategy from day one.
- BIM Execution Plans
- LOD matrices
- VDC coordination
09 / BIM
BIM Facility & Asset Management Louisiana
As-built BIM models enriched with asset data - equipment tags, model numbers, warranty and maintenance information - handed off for facility and asset management after construction closes out. Louisiana institutional, healthcare and government owners use these models to run CMMS platforms and plan long-term maintenance, turning the construction model into a working operations tool instead of a closeout formality.
- Asset data
- CMMS handoff
- As-built models
